Analysis of the correct use of 4g lte gps tracker

Comentários · 1401 Visualizações

With the development of science and technology, the application of trackers is becoming more and more extensive. For a car tracker, it is necessary to master its correct use. Do you really want to know how to use 4g lte gps tracker? Next, the editor will analyze the correct usage of the ca

With the development of science and technology, the application of trackers is becoming more and more extensive. For a car tracker, it is necessary to master its correct use. Do you really want to know how to use 4g lte gps tracker? Next, the editor will analyze the correct usage of the car locator for you.

1. GPS positioning terminals are divided into: wiring models and installation-free models;

In addition, the installation methods of these two car locators are also slightly different. The wired locator needs to be connected to the power supply of the vehicle in order to operate normally for 24 hours; while the installation-free locator, usually after one charge, will be installed according to the positioning. The battery capacity and working mechanism of the device determine the standby time;

2. How to start the GPS positioning terminal:

1. Install the SIM card to the car locator;

2. Charge and/or power on the locator so that it can be powered on;

3. After the vehicle or locator is taken outside for a period of time, the locator can be activated;

3. The steps for installing the SIM card in the car locator are as follows:

1. Open the back cover of the locator or the SIM card slot plug of the locator;

2. Insert the SIM card into the SIM card correctly according to the card insertion diagram on the locator;

3. Close the back cover or the slot plug;

4. Power-on operation mode of vehicle locator:

1. Wiring locator: If you know the car circuit, you can install it yourself. First, make sure that the voltage supported by the device is in the same range as the output voltage of the car battery, and then find the positive and negative poles of the power supply. The negative pole is very easy to find, and the place where the body is grounded It is the negative pole, the positive pole is found in the fuse box, near the key switch of the car or directly connected to the battery; if you do not understand, you can also ask the relevant technical personnel to install it.

Tip: Good connection to normal power performance is not affected by the car key switch, the power cord directly drawn from the car battery; the lighted side of the car locator should face the sky, do not stick to metal objects to block the internal GPS antenna, it It can also receive satellite signals from 20,000 kilometers away.

2. Installation-free locator: Connect the wire of the locator to the locator and plug it into the power supply. When the locator is fully charged, the charging indicator of the locator will change color or stop flashing;

Note: Different models of car trackers have different charging indicators, so you can operate according to different models of trackers. After the above steps are completed, the locator can be used normally.

The above is about the correct use of the 4g lte gps tracker. It is very important to master these to avoid unnecessary failures when using the car tracker.

4g lte gps tracker https://www.eelinktracker.com/4g-lte-fdd-gps-tracker-worldwide-used-tracking-device.html

Comentários